900345 J.Thielmann Spain Sales
If you are looking for a reliable supplier where you can purchase the 900345 Pneumatic Motor, you are in the right place. MERALES AUTOMATIZACION sells in the Spain marketJ.Thielmann all product groups belonging to the brand, with fast delivery times and competitive prices.
Technical Specification
JT-1536 - For gas nozzle cleaning device BRG - With protective cap - D=36mm - Air supply thread G1/4" - Exhaust thread G3/8" - Silencer G3/8" - Includes silencer G3/8" with dirt ring - From 11-2015 to 11-2017 in BRG-3000 - Used in BRG-10 Xline - Various special devices BRG-2000 XXX - Replaces motor DM-05 900, item no. 900333 Note: Motor is suitable for oil-free use, but slight oiling increases the motor lifespan. For this, use a maintenance unit with suitable pneumatic oil: Maintenance units: - Item no. 890108 alternatively - Item no. 300586 Suitable pneumatic oil: - Item no. 300703
Note 1:
When using a motor 900345, supplied
from January 2025, it must be noted that the new
version is 4mm shorter at the back / bottom when replacing an old
motor.
Note 2:
Motor is suitable for oil-free use.
Slight oiling of the air supply increases the motor
lifespan. Use maintenance unit with suitable
pneumatic oil.
Maintenance units:
- Item no. 890108 alternatively Item no. 300586
Pneumatic oil 2.5 liters:
- Item no. 300703
Note 3:
Removing the motor cap:
The direction of rotation to loosen the motor cap
is counterclockwise when viewed from above
on the motor cap / motor shaft.
To remove the motor cap, place the motor on
a flat surface. Insert a 5mm pin L=40mm or, for example, a
M5x40mm screw into the 5mm transverse hole, and hit
the end of the screw or pin with a rubber hammer. Repeat if necessary.